Extraction Pump Sample Instructions

Attachment-1 (1).jpeg
  1. Make sure that the oil is at operating temperature and that the equipment is operating or has been shut down for less than 10 minutes.
  2. Insert the sample tube down the dip stick hole or into the sampling port.  Try to ensure that the sample tube does not touch the bottom of the sump.

  3. Ideally, the sample should be taken from the same location and using the same method each time.

  4. Attach the sample bottle to the pump and fill to mark indicated on the sample bottle.

Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out