Drain Plug Sample Instructions

Draining_motor_oil.jpg
 
 
  1. Take sample within 10 minutes of using the equipment. (i.e. shutting off the engine or coming off the track)
  2.  If this is not possible, drain 1 quart of fluid into a quart or larger container, shake for 1 minute before filling the sample bottle.

  3. Always use the sample bottle provided in the kit.

  4. Clean the area around the drain plug to remove possible contamination before taking sample.

  5. Allow the oil to drain for 5 seconds before beginning to take the drain sample.

  6.  Only fill the sample bottle 3/4 full. DO NOT fill beyond the top of the label on the bottle.

  7. Place the sample bottle in the plastic bag and seal.

 
 
Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out